Simple wiring: the receivers are connected using a serial link
Integral SRS, allowing the use of two receivers
Compatible with: Futaba, Spektrum, Graupner, Jeti, Multiplex and JR
High-current power socketMPX or Deans
S-BUS output for use in a BUS system
Hold/Failsafe option for each output individual
User-variable frame rate
Can be updated using the PowerBox USB Interface
4.0V - 9.0V
2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state
Maximum load current
Supported RC systems
Futaba, Spektrum, Jeti, Graupner, JR, Multiplex
Servo signal resolution
Signal frame rate
12ms, 15ms, 18ms, 21ms
55 x 40 x 14 mm
-30°C to +75°C
ThePowerExpander SRSmakes it possible to exploit all the channels provided by your radio control system when using small but highly-specified receivers. Safety is also significantly enhanced, because two receivers can be connected to thePowerExpander SRS. The integralSerialReceiverSystem selects any receiver, and - if an error should occur - switches over automatically to the receiver which is still operating.
This represents a simple method of doubling the number of receiver aerials. The unit is fitted with a high-current socket to ensure that the power supply can cope with the large number of channels which it makes available. It also features an output carrying the S-BUS signal, which makes it possible to use any radio control system in conjunction with an S-BUS wiring arrangement.
As powersupply we recommend the PowerBoxBaseLogor the PowerBoxGemini II.