All features can be controlled from PowerBox and Jeti transmitters
All systems can control the unit via BlueCom or PowerBox-USB
Servo feedback current suppression
Machined and anodized aluminum switch case
Space-saving design
Ultra-low weight
-
Technical Data
Operating voltage
4.0V - 9.0V
Power supply
2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state
25mA
Current drain Standby
20μA
Maximum load current
Duration 12A (< 30s: 20A)
Supported RC systems
Core P²BUS, Jeti Ex-Bus, Spektrum SRXL2, Futaba S.
Receiver redundancy
SRS
Channels
26
Servo sockets
12
Servo signal resolution
0,5μs
Signal frame rate
10ms, 12ms, 14ms, 16ms, 18ms
Supported telemetry systems
Core P²BUS, Jeti Ex-Bus, Spektrum SRXL2, Futaba S.
Dimensions
22 x 23 x 42 mm
Weight
15g
Weight Sensor Switch
6g
Temperature range
-30°C bis +85°C
Product description
ThePBR-12Xis ideal for use in any model where space is limited, but where a large number of channels is required. The square arrangement of the servo sockets allows the PBR-12Xto fit even in very narrow fuselages, such as those of, F5J- and F3B-gliders.
The integral electronic switch is operated using our MicroSwitch. If there is no space for this, the PBR-12Xcan be activated simply by plugging in or disconnecting the battery, as it stores the last switched state. The unit features an integral high-current input with a compact MR30 connector in order to cope reliably with the current drain of twelve servos. An MR30 to MPX adapter is included in the set.
Any receiver with a bus output can be used as the receiving component. The unit automatically detects the bus system to which it is connected, which means that no set-up work is required apart from setting the fail-safe positions. Two receivers can be connected to form the basis for a redundant receiving system. If thePBR-12X detects lost data packets from the first receiver, they are replaced with the data from the second receiver; there is no loss of data.
