PowerBox Source DNRS

3420 DNRS

$ 182.50


Next Previous


PowerBox Source

The PowerBox Source is the logical further development of the successful BaseLog . Customer requirements and requirements for modern telemetry systems were incorporated.

 

Features

  • High performance
  • Optimized cooling
  • Small size
  • Optionally with OLED 128x64 pixels
  • 4 different output voltages
  • All battery types usable
  • Operation via a switch, BlueCom or USB interface
  • Supports 5 different telemetry systems: CORE P²BUS, Jeti EX-Bus, Futaba S.BUS2, Multiplex M-Link, Graupner Hott
  • Redundant controller design
  • Suppression of servo return currents
  • Protection against electrostatic discharge
  • Built-in controller monitoring
  • Updatable with the USB interface or the BlueCom adapter
  • Technical Data

    Operating voltage 4,0V - 9,0V
    Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd / NiMH
    Power consumption operation 85mA
    Power consumption Standby 10uA
    Current capacity Tip 2x20A
    Dropout voltage 0.3V
    Output voltage 5.9V / 7.4V / 7.8V / 8.4V
    Display OLED 128 x 64 pixels (optional)
    Supported telemetry systems PowerBox, Jeti, Futaba, Graupner, Multiplex, JR
    Dimensions 54 x 88 x 23 mm
    Weight 77 g
    Weight sensor switch 15 g
    Temperature range -30 ° C to + 85 ° C

    Set contents

    • PowerBox Source
    • sensor switch
    • 3 power patch cables (1x MPX / MPX and 2x MPX / JR)
    • 4 rubber grommets and brass sleeves, pre-assembled
    • 4 fixing screws
    • Operating instructions in English and German

    Product description

    The PowerBox Source is the logical further development of the successful BaseLog . Customer requirements and requirements for modern telemetry systems were incorporated. The size could be reduced by optimizing the cooling surfaces. Thus, the PowerBox Source can also be used for small models with high power requirements. The power reserves of the small bundle of energy are enormous and are in no way inferior to the larger turnout systems!

    A small O-LED display can be connected as an option - so you have all battery data even with concealed installation always in view. Even without a display, the PowerBox Source can be used in full functionality: the Data connection allows all settings either with the smartphone and the BlueCom adapter or our USB interface with the laptop or PC.

    Especially CORE pilots can operate the PowerBox Source completely from the transmitter without any accessories!

    All relevant data are, according to the prior art, transmitted via the telemetry system to the transmitter. In addition to the CORE telemetry, the PowerBox Source can also transmit the telemetry data to Jeti, Graupner, Multiplex and Futaba transmitters. Incidentally, Futaba will no longer need an additional teleconverter.

    The PowerBox Source can be set to four different output voltages: 5.9V - 7.4V - 7.8V and without regulator, so that the battery voltage is switched through with little loss. The MPX inputs and outputs are equipped with locking clips or tabs to secure the connectors against heavy slipping.