Tutorial JET CENTRAL

TURBINE CONNECTIONS 
The turbine connections tutorial will demonstrate how to correctly make all the links between the battery, HDT, PowerPack and the turbine.
 
RADIO ADJUSTMENT
In this video, show how to make the radio adjustment for the values FAIL, IDLE and FULL operation whit the Jet Central HDT.
SYSTEM TEST
The system test tutorial will demonstrate how to correctly do and prove the different trials set to assure the performance of your turbine and electronics.
BATTERY SELECTION
The battery selection tutorial will demonstrate how to choose the right battery type and capacity.
ALTITUDE ADJUSTMENT
The altitude adjustment tutorial will show you how to adjust your altitude values according to the location you are flying in.
FUEL TANK ADJUSTMENT
The fuel tank tutorial shows you how to input the values of the tank you are using, as well as how full it is so consumption calculations are made correctly.
STARTUP
The startup tutorial shows you what a complete and well-executed start-up cycle is like, following the steps to assure that our full system is working in the best conditions for our flight.
DOWNLOAD & UPLOAD PARAMETERS
The downloads and uploads tutorial will show you how to make downloads and uploads of the data you desire; we will be using the jet central power pack and the hand data terminal.
PITOT
The pitot tutorial will show you how to set the pitot or adjust the speed of your flight, making sure you do not go over the limit you want.
JETI TELEMETRY
The Jeti telemetry tutorial shows you how to set the telemetry and visualize the data you want; we will be using the DS-16 Jeti radio as a demonstration.
SPEKTRUM TELEMETRY
The Spektrum telemetry tutorial shows you how to configure your radio following the steps are given by the hand data terminal.
BLUETOOTH Android
The Bluetooth tutorial will demonstrate how to download the app, pair and operate your device as a hand data terminal.
GEAR FAIL SAFE
(Security System)

 Jet Central Landing gear fail safe set up

TURBINE FAIL SAFE
(Security System)

How to adjust the fail safe in SE Jet Central Turbines

SMOKE SYSTEM

Jet Central smoke system installation and set up


SEQUENCER

Basic functions and use for the Jet Central dual sequencer

LOW AND HIGH FUEL START-UP

 How to adjust the startup fuel in SE jet central turbines

ACCELERATION ERRORS AND CALIBRATION

 How to deal with accelerations errors during the first start up

x