10mm SLIM Navigation Light, 4W

SLIM-040-RT

CONTACT US


Thin high-performance light with 4W and wide beam angle through a specialspreading cap.

The slim light is delivered as a ready assembled unit on a special, CNC manufactured aluminium tube and a permanently mounted polycarbonate cap as covering.

The luminaire is ready to use for operation with 2S LiPo (ca.

8V).

With 3S (12V), the enclosed resistor has to be used.

Alternatively you can use a 4W-3S adaption cable.

Additionally, the scope of delivery contains another cap of polycarbonate, which transforms the luminaire into a profiled/drop-shaped outside light.

The cap can be separartely glued in and individually varnished in the model colour.Electricity: 4W reference power, 8(12)V, 0.35A Beam angle: >120° Light intensity: ~50 Lumen RED Light intensity: ~80 Lumen GREEN Light intensity: ~110 Lumen WHITE Dimension cooling tube: D10x45mm, flange D12mm Dimension light cap: D10/12mm, 57.5mm length Weight: 5g (without cable) Ready to use with 1m silicon cable and series resistor for 2S, resistor for 3S enclosed, profiled expansion cap The reference power is a comparison value between our offered lights.

It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.  The luminaire is ready to use for operation with 2S LiPo (ca.

8V).

With 3S (12V), the enclosed resistor has to be added.

Please note that high-performance LEDs can get very hot, up to 70°C is quite normal.

These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible.

If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

Note: The LED lights are extremely bright! Never look directly into a LED! TECHNICAL INFORMATION CONNECTION