SPOT35-040x2-WE
$ 40.00
This innovative 35mm category spotlight is suitable for all larger models and provides, on the basis of its enormous light power and wide-angle beam, maximum visibility under all conditions.
Ideal for tip tanks, hoods, or as a landing light in big high-wing aircraft.
Due to the short construction, they are perfectly suitable for fuselage nose and drop-down spotlight.
Direct operation with 2S LiPo (8V).
With 3S (12V), the additional enclosed resistor has to be soldered in, or a 4W adapter cable (accessories).
The reflector operates as a heatsink, which means permanent operation is possible - provided that air circulation is available (in flight).
If this is not the case, a duty cycle of 5-10minuntes should not be exceeded.
Please check operating temperatures after installation! High-quality aluminum reflector. Wide-angle beam: 100°. Completely made of massive aluminum, CNC-manufactured, extremely short design x2-technology for doubling light intensity. Available in WHITE and WARMWHITE. Performance: 2x4W reference power. Voltage: 8V; use an additional resistor for 12V! Electricity: 0.4A. Beam angle: ~100°. Light intensity: 100x2 lumens WHITE light intensity: 95x2 lumens WARMWHITE. Dimensions: D35x13mm Weight: 18g (without cable). Ready to use with a 1 m connection cable and an additional resistor for 3S operation. With the X2 technique, high-power LEDs are operated in a "cluster".
These achieve double the light output for the same heat or the same light output at half heat dissipation.
Yet our X2 lights are still fully compatible with all our other lamps.
If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights react more strongly to a weakening battery.
The reference power is a comparison value between our offered lights.
It normally refers to an operating voltage of 12V/3S LiPo and is dependent on bulbs, operating mode, and technology.
Always pay attention to the operating temperature; we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED! TECHNICAL INFORMATION CONNECTION
