Pneumatic valve V2s XICOY


$ 54.00

Pneumatic valve V2s XICOY



Double action electronic valve.

Can be used for control of retracts or gear doors in a single unit. Plugs directly into RX.

Three positions. OPEN A - CLOSED - OPEN B. Allow to depressurize the air system to avoid air leaks. Can be used as two independent units if no need for both valves to open at the same time.

Endpoints are easily programmable by a pushbutton. Status LED and manual mode operation, can be opened without electric power.

  • Up to 7bar /100psi. Small size: 34x20 mm.
  • Light weight: 32 grams (1 oz). Voltage: 4 to 8.4V
  • Low current consumption. <6mA inactive 80mA active


Power ON the valve while keeping the button pressed.
Release the button. The LED will blink at 1 pulse/second. Set the radio to the "Gear Up" position.
Press the button. The valve will store the current command as "Gear Up".
The LED will blink twice a second. Set the radio to "Gear Down position".
Press again the button to store the command. 

Note: The valves manufactured from November 2014 (Green LED light) allow to program the power-up state. Normal power-up state is both valves closed (System not pressurized). In the case you need the system to be always pressurized, clicking on the button during normal operation allow to change the "power on" state to pressurize the system immediately after powering up.