PowerBox Pioneer

4100

$ 236.00


PowerBox Pioneer

 

 

 

Features

  • 14 channels
  • Powerful battery switch with high durability
  • The consistently double layout of the power electronics
  • redundant electronic switch
  • Complete operability from the transmitter for PowerBox and Jeti
  • Operation via BlueCom or PowerBox USB for all systems
  • The latest iGyro technology integrated, with the iGyro Sat as a gyro sensor
  • 9 independent gyro outputs for 3x ailerons, 3x elevator, 3x rudder
  • The special control algorithm for surface models
  • Detection of all mixers in the transmitter
  • Simplest gyro programming in a few minutes
  • Optionally with GPS for speed-dependent gyro compensation
  • Telemetry data for PowerBox P²BUS, Jeti Ex-BUS, and Futaba S.BUS2
  • Transmission of voltage, a current, capacity, lost frames and holds
  • Adjustable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
  • Suppression of reverse servo currents
  • The latest 32-bit microprocessor for fast and precise signal processing
  • Optimized heat dissipation via the elegant, milled and anodized aluminum housing
  • Switch housing made of milled and anodized aluminum
  • Space-saving, flat design
  • Extremely light construction

Technical Data

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo / LiIon, 2S LiFePo, 5S NiCd / NiMH
Power consumption operation 105mA
Standby power consumption 30µA
Current carrying capacity Duration 2x10A (<30s 2x20A)
Dropout tension 0.3V
Output voltage unregulated
Signal input serial
Supported remote control systems PowerBox, Jeti, Futaba
Receiver redundancy SRS
channels 26
Servo outputs, total 14
Resolution of servo pulses 0.5µs
Pulse repetition rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro control Heading and normal mode
Gyro sensor type external iGyro Sat
Number d. Sensor axes 9
Supported telemetry systems P²BUS, Ex-Bus, S.BUS2
Dimensions 63 x 44 x 12 mm
Weight 40g
Weight sensor switch 6g
Temperature range -30 ° C to + 75 ° C

Set contents

  • PowerBox Pioneer
  • MicroSwitch
  • 2 patch cables
  • 1 adhesive pad
  • Operating instructions in German and English

Product description

The PowerBox Pioneer is the latest development of a 14-channel power supply, which is designed for HV servos without voltage regulation. By eliminating the voltage regulator and the large cooling surfaces required, the Pioneer can convince with the smallest dimensions. Nevertheless, there is no need to do without a redundant power supply design - the standard for all PowerBox Systems power supplies! The power section and the switching controller are designed twice to guarantee maximum safety.

The Pioneer is unique in its class thanks to the integrated iGyro technology, which only requires an iGyro Sat as a sensor unit. Optionally plugged in, a powerful 9-axis gyro of the latest generation is turned from a power supply. The integrated iGyro is very easy to use, set in a few minutes, and ready for the setting flight. Even for complex models or the perfectionist, the Pioneer offers plenty of options for a fine adjustment! Stick priority, lock-in-feel, and gyro characteristics can be set separately for each axis and for two areas, to name just the most important ones.

 

The entire package is rounded off by the ease of use: For PowerBox and Jeti pilots, the Pioneer can be operated and set entirely from the transmitter! Optionally, or for Futaba pilots, the Pioneer is set using the BlueCom adapter and the mobile app or from a PC with the USB interface.

In terms of performance, the compact Pioneer is in no way inferior to the big switches. Many test series were run with 40A load over several minutes, 20A continuous current is guaranteed here. The shapely aluminum heat sink provides the necessary heat dissipation and even the external switch is supplied in a noble, made of the fully milled, anodized aluminum.

As a further option, the new Pioneer is also available with the MicroMag magnetic switch. This switch can be installed visible or hidden and switched on with the enclosed magnet.

For Spectrum users please check the Lead adapter require HERE